Steven

Steve est journaliste et musicien. Il vit en ce moment en Amérique du Sud, entre Argentine et Uruguay. Cet amoureux des chats, nominé pour son travail d'investigation aux Emmy Awards, collabore aussi régulièrement avec High Times, Green Rush, Zamnesia  Royal Queen Seeds et bien d'autres.

La weed fera-t-elle rouler la planète?

/

En plus de produire une belle fibre, nettoyer le sol ou alimenter animaux et humains, le cannabis peut être transformé en 2 types de carburant; biodiesel et éthanol. La weed fera-t-elle (aussi) rouler les voitures de demain ?  La ganja, fuel responsable pour une  relance post-pandémie verte et smart ? Voici quelques Éléments de réponse.

Le chanvre peut fournir 2 types de combustible; le biodiesel, fabriqué à partir de l’huile de graines de chanvre pressées, et l’éthanol, fabriqué à partir de tiges de chanvre fermentées. Et il s’avère que la belle plante pourrait bien  être la source de carburant le plus écologique de la planète. Le pétrole brut et le gaz naturel sont les deux matières qui fournissent près de 70% de la consommation énergétique mondiale.
Deux produits qui proviennent de réservoirs situés à des milliers de mètres sous terre. Les deux sont des combustibles fossiles formés au cours de millions d’années par la décomposition d’organismes morts. Leur production est chère et a un impact énorme sur l’environnement.

Le chanvre, lui, est une plante qui peut être cultivée presque partout et qui produit des rendements de biomasse élevés pour une production de carburant en quelques mois seulement.
Et si les carburants au chanvre sont environ 50% moins efficaces que l’essence, les avantages environnementaux de la culture du chanvre pour le carburant dépassent de loin ceux de la recherche de pétrole brut ou de gaz naturel (qui sont eux des plus négatifs). Là encore, trouver une alternative écologique au pétrole brut ou au gaz naturel n’est pas vraiment difficile.

La vraie question serait plutôt :  le cannabis est-il une bonne base pour créer des carburants alternatifs type biodiesel et éthanol?

Le biodiesel est fabriqué en mélangeant des graisses végétales ou animales et de l’éthanol. Aujourd’hui, selon l’EIA  (Energy Information Administration, L’Agence d’information sur l’énergie américaine),  plus de 50% du biodiesel est fabriqué à partir d’huile de soja. L’éthanol, d’autre part, est généralement produit à partir de maïs ou de canne à sucre.

En tant que culture, le cannabis offre de nombreux avantages par rapport au soja, maïs et à la canne à sucre. La densité de plants par hectare pour le maïs, la canne à sucre et le soja, par exemple, est respectivement de  44 000, 50 000 et 200 000 kilos. Le chanvre, quant à lui, peut être cultivé à une densité pouvant atteindre 2 400 000 Kg/hectare, selon Agriculture Manitoba.

Le chanvre triomphe également du soja, du maïs et de la canne à sucre sur plusieurs problématiques cruciales : il peut être cultivé sous presque tous les climats, peut être prêt à la récolte en seulement 4 mois et est particulièrement résistant aux nuisibles et aux maladies. Il peut même aider à extraire les métaux lourds et autres contaminants des sols pollués, ce qui est beaucoup plus que ce que nous pouvons dire pour le soja (qui tue la biodiversité et contribue à l’érosion des sols).

Au moment de la récolte, le chanvre produit BEAUCOUP de biomasses. Selon Agriculture Manitoba, le chanvre industriel cultivé pour la fibre peut produire jusqu’à 6 tonnes par hectare, tandis que les plants de céréales (cultivés pour les graines) produisent environ 1000 kg par hectare.
Alors, pourquoi ne trouve-t-on pas d’essence de cannabis chez Shell ou BP?
Avec tant d’avantages à cultiver du chanvre pour le carburant (en plus de ses innombrables autres utilisations), il semble difficile de comprendre que nous ne récoltons toujours pas les fruits de cette plante miracle.

Qu’est-ce qui empêche le monde de se mettre au vert et au  chanvre?
Avant tout, remettre le monde au biodiesel de chanvre nécessiterait d’énormes quantités de terres agricoles. Selon Medium, la moitié des États-Unis devraient être recouverts de chanvre juste pour répondre à la demande du pays. Sans oublier que le biodiesel de chanvre coûterait environ 13 fois plus cher que le diesel ordinaire. En revanche,  l’éthanol de chanvre pourrait être produit pour moins de 2 $ le gallon. Et là, c’est intéressant.

Malheureusement, le chanvre est toujours freiné par le fait qu’il s’agisse d’une culture encore en devenir, et qui atteint ses prix les plus élevés lorsqu’elle est cultivée pour les industries alimentaire, cosmétique et CBD. Et aussi le fait que Standard Oil, Gulf Oil et DuPont aient été liés à la prohibition du cannabis dans les années 1930 pourrait aussi avoir quelque chose à voir avec la raison pour laquelle nous ne remplissons pas nos voitures avec du chanvre.

Mais ça, c’est une autre histoire.

 

From Brick To Bud: Argentina’s Slow Transition Away From Brickweed

///

In South America, weed is not what it use to be. And that’s probably a good thing, as our correspondant in Argentina explains.

“I’m buying weed. Want me to hook you up?”
About a month after moving from Melbourne, Australia to Buenos Aires, a new work colleague signed off his email with that question and made my day.
I typed an emphatic “YES!!!” on my keyboard and, a few days later, I was at his downtown apartment, eager to get my hands on my first batch of 25g of Argentine weed.

“It’s in the kitchen, inside a pack of Marlboro,” he said.
Instantly I felt my face change; while I still didn’t know what to expect, I knew this wasn’t going to be the lush, green 25g I’d pictured in my head for days.
I flipped open the Marlboro pack and there it was: A thick, brown brick riddled with sticks and stems and reeking of ammonia.

“How do I cut this thing?” I shouted to my friend in the living room.

After sawing through that brick with a serrated steak knife, I managed to roll a thin, lumpy joint and stepped out onto the balcony to smoke.
As I stood out in the thick air of an early Buenos Aires summer evening, I got my first taste of paraguayo; my head got heavy, my body felt numb, and I followed every drag with a sip of beer to wash the dirt flavor from my mouth.
Paraguayo or prensado, as it’s sold locally, is a type of brick weed that has dominated the Argentine cannabis market for years.
It’s shipped over the border from Paraguay, the second-largest cannabis producer in Latin America, and is sold in bricks of 25g.

For a long time, paraguayo was the weed norm in Argentina, but that’s changed quite dramatically.
Today, cannabis consumers in Argentina are ever more actively hunting out flores (or cannabis flowers), tinctures, creams, and even extracts.

But what’s driving this sudden change in appetite?

Over the past years, Argentine cannabis activists have been fighting hard to legalize cannabis both for medicinal and recreational use.
In 2017, the federal government legalized medicinal cannabis to some extent, although it continued prosecuting and imprisoning patients growing and producing their own cannabis medicines at home.
The right to cultivate for personal use, or autocultivo, is still at the heart of the legalization debate here. It’s what NGOs like CAMEDA and Mama Cultiva are fighting so hard for.
Now, not only are more Argentines growing their own weed, but their attitudes towards cannabis are also changing.

“Today, there’s a lot more awareness and a bigger movement around cannabis, and I think the fact that the plant has medicinal properties means people are changing their perceptions of it,” says Agustin, a 32-year-old audiovisual designer.
“This summer I grew 2 plants outdoors. I didn’t want to keep buying weed; I wanted to grow my own and know what I was smoking,” he says.
Agustin represents a growing community of cannabis users in Argentina who are either growing their own plants or actively searching out quality flowers over Paraguayan brick weed.

“In general, the Paraguayans are good growers, but they make some unforgivable mistakes during the harvest and pressing processes,” writes Matías Maxx in a report about his visits to a Paraguayan cannabis farm. 

Many harvest during rainy seasons and dry their plants directly on the soil under big sheets of plastic, which creates a breeding ground for bacteria and fungi. The poorly trimmed and sometimes still humid branches are also thrown on the floor during pressing, exposed to wasps and other insects that often end up in the finished product.
“Once you learn about what goes into a prensado, you’ll never want to smoke it again,” says Frank, a 32-year-old musician who grew his first plants over the summer. “Maybe younger kids still smoke it. When I was younger flowers were hard to score and expensive.”
The fact that grow shops are popping up all around Buenos Aires has also encouraged more people to cultivate their own bud.
“There’s more access to quality flower, there’s more information about how to cultivate and more shops selling the products necessary to do so,” says Juana, who grew 10 plants on his terrace over the summer.
The fact that growing cannabis is punishable by a prison sentence doesn’t worry most Argentine growers. And soon, they might not have to worry about the law at all:
Last year, President Alberto Fernandez openly showed his support for the decriminalization of cannabis.
This year, Minister of Security Sabina Frederic announced she was studying legal markets in Uruguay, Canada, and the US for inspiration on how to approach decriminalization in Argentina.
If these measures are taken seriously, Argentines might soon have the right to grow their own cannabis, finally eradicating the market for cheap, smelly paraguayo altogether.

 

Les alternatives de Steve: Le kit HPS, la solution home growing spécial COVID-19

///

En culture intérieure comme outdoor, la weed a besoin de lumière, rien de nouveau sous le Soleil.
Les lampes LED, apparues il y a quelques années fournissent un spectre de qualité, mais coutent cher à l’achat.
Star du homegrowing en mode pandémie : les lampes HPS, qui si elles consomment un peu plus, coutent beaucoup moins à l’achat.
Après nous avoir appris à fabriquer sa grow tent et faire soi-même son terreau, Steve, notre docteur ès ganja-growing, nous livre sa sélection lampe/ventilateur/thermo-hydromètre … pour le prix d’une cartouche de clopes.

 

Et la lumière (pas chère) fût!
Pour les cultivateurs débutants qui cherchent à cultiver seulement quelques plantes pendant COVID-19, le kit Omega est parfait. Il est livré avec un ballast programmable, une lumière à double spectre de 600 W pour les légumes et la floraison, une hotte à réflecteur et des attaches de câble pour une installation facile. N’oubliez pas d’utiliser une minuterie pour gérer correctement vos périodes claires / sombres.

 

 

 

De l’air!
La ventilation est cruciale lors de la croissance de votre weed. Sans déplacer l’air frais dans et autour de votre salle de culture, vous pourriez rencontrer des problèmes de chaleur ou d’humidité qui peuvent faire frire vos plantes ou créer un terrain fertile pour les ravageurs et les fléaux. Pour de meilleurs résultats, investissez dans un petit ventilateur mural et un combo ventilateur-filtre en ligne comme celui d’iPower.

Et un indic’ (de température et humidité).
Le thermomètre / hygromètre Neoteck est parfait pour mesurer la température et l’humidité dans votre tente, homemade bien entendu.

 

Après avoir   fait votre engrais, votre terreau  et  choisi vos graines,(voir nos articles) ça va sans dire…

Bonne culture!!

 

 

 

Pénurie Guérilla S01 E08 : Comment fabriquer sa Grow Tent.

////

Dans un monde confiné à la pénurie et dans lequel les consommateurs paient leur weed au prix fort (quand il y en a),  le home growing s’impose comme la smart alternative à la dèche cannabique.
Problème, les sites de vente de matériel, quand ils ne pratiquent pas de tarifs prohibitifs, sont eux aussi en rupture de stock.
Pas de panique, vous êtes dans Pénurie Guérilla.

 

Après avoir fait votre engrais, votre terreau et choisi vos graines, il ne vous restera plus qu’à confiner votre culture dans une grow tent faite maison et sujet de notre huitième épisode.

 

La méthode

Tout est dans le cadre
Utilisez 4 tuyaux en PVC de 1 m et 4 raccords transversaux à 3 voies pour créer la base carrée de votre tente.
Connectez 4 tuyaux en PVC de 2 m aux joints d’angle de votre base pour créer les supports verticaux pour les murs de votre tente.
Utilisez les autres morceaux de tuyaux en PVC, les raccords en T et les raccords transversaux pour créer le toit de la tente.
Cela devrait ressembler à la base, mais avec 4 morceaux de PVC rattachés en plus au centre du toit et disposés en croix. Ce sont ces deux tiges qui supporteront  votre lampe de culture.

 

… et  les murs
Pour créer les murs de votre grow-tent anti-pénurie, l’idée est d’utiliser du  film poly  aussi appelée film panda,  ici largement détourné de son usage original.
Pas cher, facile à trouver (Wallmart, Home Depot, Castorama…), convenablement durable (vous l’aurez encore quand le vaccin sera trouvé ) et hermétique.
Le côté blanc du film est parfait pour les murs intérieurs de la tente, car il réfléchira une grande partie de la lumière sur vos plantes, et le côté noir du film idéal pour ne pas attirer les regards extérieurs. 

L’emballage
Utilisez le morceau de film de 3,5 mx 2,5 m pour couvrir 3 des 4 murs de votre cadre (le 4e servira de porte à votre tente). Pour ce faire, il peut être utile de disposer le film à plat sur le sol et de poser votre tente dessus.
Ensuite, enroulez simplement les bords sur les murs, coupez tout excès et fixez les bords du film au cadre en PVC à l’aide de ruban adhésif. L’idée est que les « murs » soient bien enroulés de la façon la plus tendue possible autour du cadre,  et courent jusqu’au sol pour renvoyer et cacher le plus de lumière possible.
Enfin, couvrez le toit de votre tente à l’aide du film de 1,5 mx 1,5 m et coupez tout excédent. N’oubliez pas de laisser environ 2-3 cm de chevauchement sur chaque mur, puis fixez le tout avec du ruban adhésif.
Au tour de la porte de la tente: utilisez votre dernier morceau de film poly et faites-le passer du sol jusqu’au milieu du toit.
Coupez tout excédent et fixez-le avec du ruban adhésif.
Puis utilisez 3 bandes velcro le long de l’intérieur du cadre en PVC et du rabat de la porte pour garder votre porte sécurisée lorsque vous n’avez pas besoin d’accéder à vos plantes.

L’astuce : une fois que vous avez terminé d’installer votre tente, placez-vous à l’intérieur et recherchez les fuites de lumière. Si vous repérez de petites fuites, recouvrez-les de ruban adhésif à l’extérieur de votre tente.

Les cinq éléments:

20 tubes en PVC de ¾ ”dans les tailles suivantes:
-4 pièces de 2m de long
-4 pièces de 1 m de long
-12 pièces de 40 cm de long

13 Raccords PVC ¾ ”:
-8 raccords d’angle à 90 degrés à 3 voies
-4 raccords en T
-1 raccord en croix

3 feuilles de film poly noir et blanc (parfois vendu comme film Panda) dans les formats suivants:
-3,5 mx 2,5 m
-2,5 mx 1,5 m
1,5 m X 1,5 m

Un rouleau de ruban adhésif

6 bandes velcro

Les m et m2 indiqués sont ceux permettant de fabriquer une Grow Tent  au format « 1x1x2 » (mètres)  soit 1 m2 de surface au sol,  ce qui constitue déjà un espace tout à fait appréciable puisque les rendements de weed à floraison automatiques sont de l’ordre de 350 à 650 grammes au mètre carré. De quoi s’assurer une autarcie cannabique pour un moment, en une récolte prête en moins de deux mois.
Si vous voulez construire une tente plus petite, il suffira de diviser par le même chiffre le métrage des tubes en PVC et la surface du film.

 

Bonne culture!

 

 

Shortage guerilla: building a grow tent from scratch.

////

The global lockdown and quarantine caused by the COVID-19 pandemic are leaving cannabis connoisseurs with little-to-nothing to toke on (except those lucky enough to live in legal states in the US or Canada).  If you’re struggling to get hooked up during COVID-19, you’re in luck; in our upcoming posts, we’ll share some of our top tips for growing great weed at home. To get started, here’s how to set up a simple grow tent using just PVC and plastic film. 

Building A Budget Grow Tent With PVC And Poly Film

What You’ll Need

  • ¾” PVC pipes in the following sizes: 
    • 4 2m-long pieces 
    • 4 1m-long pieces
    • 12 40cm-long pieces
  • ¾” PVC fittings: 
    • 8 90° degree 3-way corner fittings
    • 4 T fittings
    • 1 cross fitting
  • 3 sheets of black and white poly film (sometimes sold as Panda film) in the following sizes: 
    • 3.5m X 2.5m 
    • 2.5m X 1.5m 
    • 1.5m X 1.5m
  • Duct tape
  • 6 velcro strips

Note: These materials are enough to build a 1m X 1m X 2m grow tent, which is perfect for most small hobby growers who just want to grow a few plants. If you want to build a bigger tent, you’ll just need longer PVC pipes and more poly film.

Method

Creating the frame. 

With your PVC pipes cut into size, assembling the frame of your tent is a piece of cake. Just follow these simple instructions:

  1. Use 4 1m PVC pipes and 4 3-way cross fittings to create the square base of your tent. 
  2. Connect 4 2m PVC pipes to the corner joints of your base to create the vertical supports for the walls of your tent. 
  3. Use the remaining pieces of PVC pipe, T fittings, and cross fitting to create the roof of your tent. This should look similar to the base, just with 4 pieces of PVC running to the center of the roof to form a cross. This will provide extra support for your grow light.

Putting up the walls

To create the walls of this budget tent, we’ll just be using black and white poly film because it’s cheap, fairly durable (as long as you don’t take to it with a knife), and takes care of light leaks. 

Plus, the white side of the film is perfect for the inside walls of the tent as it will reflect plenty of light back onto your plants, while the black side of the film is perfect for absorbing light on the exterior. 

To wrap your tent, just follow these simple instructions: 

  1. Use the 3.5m X 2.5m piece of film to cover 3 of the 4 walls of your frame (the 4th will serve as the door of your tent). To do this, it might help to lay the film out flat on the floor and lay your tent on top of it. Then simply wrap the edges over the walls, cut off any excess, and secure the edges of the film to the PVC frame using duct tape. Remember, you’ll want your walls to be wrapped tightly around the frame and run all the way to the floor to keep out as much light as possible. 
  2. Next, cover the roof of your tent using the 1.5mX1.5m piece of film and trim off any excess. Remember to leave about 2-3cm of overlap on each wall, then secure everything down with duct tape. 
  3. Now it’s time to create the door for your tent. To do this, use your last piece of poly film and run it from the floor up to the middle of the roof. Cut off any excess and secure it down with duct tape. 
  4. Finally, use 3 velcro strips along the inside of the PVC frame and door flap to keep your door secured when you don’t need access to your plants. 

Tip: Once you’ve finished setting up your tent, stand inside it, and look for light leaks. Should you spot any small leaks, cover them with duct tape on the outside of your tent. 

Deck Out Your Tent With The Right Gear

Once you’ve built your tent, all that’s left to do is deck it out with the right grow equipment. Here’s a list of everything you’ll need to start growing your first batch of homegrown kush: 

  • A grow light. There are tons of grow lights on the market, but for beginner growers looking to grow just a few plants during COVID-19, this Omega kit is perfect. It comes with a programmable ballast, a 600w dual spectrum light for vegging and blooming, a reflector hood, and cable ties for easy installation. Remember to use a timer to manage your light/dark periods correctly.
  • A fan. Ventilation is really important when growing weed. Without moving fresh air in and around your grow room, you might run into heat or humidity issues that can fry your plants or create a breeding ground for pests and plagues. For the best results, invest in a small wall-mounted fan and an inline fan-filter combo like this one by iPower.
  • A thermometer/hygrometer. This Neoteck thermometer/hygrometer is perfect for measuring the temperature and humidity in your tent. 
  • Soil, nutrients, pots, and seeds. 

That’s it! Now that you have everything to start your grow, it’s time to get your hands dirty and germinate your seeds. 

Happy growing!

Pénurie Guérilla S01 E05 : Autofloraison et autarcie

///

À moins que vous ne viviez sur la côte ouest américaine ou du Canada, il est probable que vous ayez du mal à vous fournir en weed. Notre journaliste-botaniste Steven, dont les avis avisés font les belles pages de High Times et les conseils de culture sont régulièrement publiés par Zamnesia, RoyalQueen Seeds ou Leafly, nous parle autofloraison et perles de la culture… cannabique.

Lorsqu’elles sont arrivées sur le marché  il y a une vingtaine d’années, les variétés de weed à autofloraison avaient assez mauvaise réputation : petite taille, petits effets et grosse déception étaient généralement au rendez-vous.
Les autoflo’ d’aujourd’hui, en revanche, produisent de très bons rendements pour une qualité qui n’a plus rien à envier à leurs ainées, en moins de temps et sans  soucis type gestion photopériodique.

Un rapide historique des variétés de cannabis à autofloraison


Les weed dites automatiques ou  à autofloraison sont un croisement de cannabis ruderalis, (la seule variété de cannabis qui fleurit en fonction de la maturité plutôt que des changements de photopériode) et d’indica/sativa.
Nevil Schoenmakers, breeder légendaire, aurait expérimenté les croisements au ruderalis dans les années 1970, mais ce n’est que dans les années 2000 que les banques de graines  ont commencé à vendre des semences à autofloraison.
La Lowryder par The Joint Doctor est considérée comme étant la première souche auto disponible dans le commerce. Selon le site Web de The Joint Doctor, elle est née d’un désir de créer un type de variété de cannabis «nain» «qui fonctionnerait pour les rebords de fenêtres, les balcons et les appartements exigus.»
Las !  Lowryder est  l’une des raisons pour laquelle les gens tiquent quand on parle de weed automatique : en dépit de leur maturation extrêmement rapide, les phénotypes de Lowryder  n’avaient pas bon goût et ne faisaient quasiment aucun effet.
Aujourd’hui (on n’arrête pas le progrès), une auto se récolte en 60 jours et sans désarroi quant à la quantité ou la qualité

Autofloraison :le traitement anti-pénurie du COVID-19


Si vous avez déjà fait pousser votre weed, il  n’y a pas de meilleur moment que maintenant pour se lancer dans l’aventure automatique (contrairement aux photopériodiques classiques où le commun des cultivateurs aurait du attendre le mois de juin), une aventure qui est  la meilleure solution face à la pénurie, sale effet secondaire du confinement. Faciles à cultiver, fleurissent rapidement et ne nécessitent ni formation ni taille.
Après, c’est une question de choix et de goût, et voici les miens, qui n’ont jamais décu à l’heure où j’écris cet article.
J’ai un coup de cœur pour la White Widow Automatic de Royal Queen Seeds et l’ AK47 Automatic (Royal Queen et TNT Seeds ont toutes deux d’excellentes versions de cette variété). Les deux produisent des têtes bien denses  aux terpènes en folie.
Elles sont un tout petit peu plus longues à cultiver que d’autres autos (75 jours), mais sont particulièrement résistantes.
Quelques autres variétés d’autos qui valent le détour:
La Green-O-Matic par Greenhouse Seeds Co., Cette variété, fruit de l’une des banques de graines les plus renommées des Pays-Bas, fleurit en 5-6 semaines.
La Royal Gorilla Automatic de Royal Queen Seeds, qui fleurit en 5-7 semaines et peut produire jusqu’à 20% de THC.
Grâce à leur cycle de vie court, les variétés à autofloraison sont idéales pour les cultivateurs débutants. Le cannabis ruderalis est naturellement très résistant aux insectes comme aux maladies, une caractéristique que l’on appréciera en outdoor.
Autre bon point :les autos n’ont pas besoin d’être taillées, ce qui est idéal pour les débutants qui ne se sentent peut-être pas à l’aise avec des techniques de cultivateur aguerri comme le topping ou le super crop.

Les autos poussent en intérieur comme en extérieur ; si vous êtes dans l’hémisphère nord, vos autos grandiront  très bien sous le soleil (en particulier dans des régions comme le sud de l’Espagne, le Portugal, la France et l’Italie). Si comme moi vous êtes dans l’hémisphère sud, en revanche, c’est l’option indoor qui s’imposera. Si vous êtes un cultivateur en intérieur, pensez à donner à vos autos 20 heures de lumière par jour tout au long de leur cycle de croissance pour maximiser leur potentiel.
Enfin, ce qui distingue vraiment les variétés auto de leurs cousins ​​à photopériode est leur facilité et leur vitesse de croissance. Tout ce dont vos autos ont besoin pour prospérer, c’est un sol de bonne qualité, un arrosage régulier et une bonne source de lumière.

Bonne croissance!

#stayhome #staystone

Shortage Guerilla: Going Autoflowering for COVID-19

/////

Unless you live in certain parts of the US or Canada, chances are you’re having a hard time scoring right now. Luckily there’s a simple solution to the COVID-19 dry spell; growing autos. 

Autoflowering cannabis strains got a pretty bad rap when they first hit the market. Today’s autos, however, are capable of producing great yields and top-shelf flower that’ll give even the most celebrated photoperiod strains a serious run for their money. 

Keep reading to learn more about autoflowering cannabis and why it’s the perfect solution to the weed shortage caused by COVID-19. 

A Quick History of Autoflowering Cannabis Strains

Autoflowering cannabis varieties are crosses of cannabis ruderalis, the only cannabis variety that flowers based on maturity rather than photoperiod changes. Breeders as renowned as Nevil Schoenmakers are rumored to have experimented with ruderalis in the 1970s, but it wasn’t till the 2000s that seedbanks started offering autoflowering seeds for sale. 

Lowryder by The Joint Doctor is widely thought of as the first commercially available auto strain. According to The Joint Doctor’s website, it was bred out of a desire to create a type of “dwarf” cannabis variety “that would work for windowsills, balconies, and cramped apartments.” 

Unfortunately, Lowryder is still one of the reasons people frown at autos; despite maturing extremely quickly, some early Lowryder phenotypes produced tiny harvests of substandard bud that didn’t taste particularly good or get you very high.

Now, however, that’s all changed. Autoflowering strains have come a long way in the last 10+ years, and even The Joint Doctor’s new Lowryder phenos have improved significantly. Today, a good-quality auto produce great yields of potent bud in as little as 60 days from seed to harvest. 

Autoflowering Weed: The Answer To The COVID-19 Dry Spell

If you’ve ever been tempted to grow your own weed, there’s no better time than now. Auto strains are, by far, the best solution to the cannabis shortages caused by the quarantine and social distancing measures put in place by governments around the world in response to COVID-19; they’re easy to grow, flower quickly, and don’t require training or trimming. 

As long as you start off with some great genetics, you’re almost guaranteed a great harvest. From personal experience, some of the best autos to look out for are White Widow Automatic by Royal Queen Seeds and AK47 Automatic (Royal Queen and TNT Seeds both have great versions of this strain). Both produce dense, sticky buds with great aromas and potency. Best of all, they take about 75 days from seed to harvest and are very resistant to pests and diseases. 

Some other great auto varieties worth checking out include: 

Thanks to their short life cycle, autoflowering strains are great for beginner growers. Cannabis ruderalis is naturally very resistant to pests and plagues, and that trait tends to shine through in a quality auto hybrid. Auto strains also can’t be trained or trimmed, which is ideal for rookies who might not feel comfortable with low-stress or high-stress training techniques (like topping or super cropping). 

The fact that autos can grow well both indoors and outdoors again makes them ideal for the COVID-19 crisis; if you’re in the northern hemisphere, your autos will do great under the sun (especially in regions like the South of Spain, Portugal, France, and Italy). If you’re in the southern hemisphere, on the other hand, your autos will do equally well under a lamp or in a small grow tent. If you’re an indoor grower, consider giving your autos 20 hours of light per day throughout their entire growth cycle to maximize their potential. 

Finally, what really sets auto strains apart from their photoperiod cousins is their ease and speed of growth. All your autos need to flourish is some good quality soil, regular feeding/watering, and a solid light source. Just give them 60-80 days to mature and you’ll be ready to harvest your very own home-grown kush during COVID-19. 

Happy growing! #stayhome

Shortage Guerilla: Growing Organic Weed.

////

Cannabis is strongly aligned with the green movement. Unfortunately, most of the weed we find in dispensaries, coffeeshops, or on the street is far from “green.” Just like other crops, cannabis is usually grown with chemical fertilizers, pesticides, herbicides, bloom boosters, and more. Here’s our guide to grow a sweet healthy ganja (and survive the shortage).

If you’re worried about the impact your love for weed is having on the environment or your health, you’re in luck.
In this article, I’ll share my tips for growing your own organic weed at home using natural soil amendments, compost teas, organic pest control, and more. 

Creating Your Own Super Soil

Healthy soil is the key to healthy plants and great harvests. 

In nature, plants get all their nutrients from topsoil, which is made up of decomposed organic matter and millions of beneficial microorganisms. When growing organically at home, your focus should be on creating that same kind of rich soil using natural ingredients, rather than pumping your plants full of chemicals. 

Below I’ll share a simple recipe for creating your own organic super soil that’ll give your plants everything they need to develop great foliage and delicious buds:

1 Start with 3 parts organic starter soil. I recommend using ProMix HP because it’s been used by countless cannabis growers for years and contains mycorrhizae, a type of fungi that helps your plants absorb more nutrients. ProMix Potting Mix also works well, as will any other organic potting mix you can find at your local gardening store. 

2 Next, you’ll want to enrich your soil with the following ingredients: 

  • 1 part perlite.
  • ½ part vermiculite for water retention.
  • 1 part worm castings.
  • 65g dolomite lime. This is a natural fertilizer rich in calcium and magnesium and helps regulate soil pH.
  • 65g fishbone meal, which is rich in phosphorus and calcium to boost your plants’ vegetative growth. 
  • 45g organic guano, a plant superfood derived from bat feces that’s rich in macro and micronutrients. 
  • 30g Epsom salts to help boost nutrient uptake and chlorophyll production in your vegging plants. 

Note 1: Dampen your soil and let it sit for 1-2 days to activate it before planting. 

Note 2: Never plant seeds or seedlings directly in this soil. Instead, let your seedlings mature in a light soil made of 50% peat moss and 50% vermiculite for about 2 weeks before transplanting them to your super soil. 

Feeding Cannabis Plants With Organic Compost Tea

The super soil we described above will provide your plants with a steady flow of nutrients throughout their entire life cycle. However, you can use compost teas to keep your soil life healthy and boost the growth of your plants even further.

There are countless compost tea recipes on the internet. For beginners, however, I recommend following this basic recipe:

  • 20l of water (if you’re using tap water, let it sit for 24 hours to help evaporate chlorine)
  • 250g compost
  • 1 tablespoon molasses
  • 1 tablespoon liquid kelp
  • 1 teaspoon fish hydrolysate 

To brew your tea, you’ll need a 20l bucket and an air pump or airstone to oxygenate the water, which further helps evaporate chlorine and supports the life of the microorganisms as your tea brews.

Let your pump aerate the water for 2-3 hours, then combine your ingredients in a nylon sock or mesh bag and let them brew for 24 hours. Don’t brew your tea any longer than this or you’ll create a breeding ground for bad bacteria like salmonella and E.coli. 

When feeding your plants, use 1 cup (120ml) of tea for every liter of water. Remember to use your tea within an hour after brewing, as it will lose activity over time. I recommend feeding plants with compost tea 2-3 times a week. 

Fighting Pests And Disease Organically

Growing organically doesn’t mean you’ll be defenseless against pests or diseases. Some of the best natural pest/disease control measures to protect your cannabis plants include: 

  • Compost tea. That’s right, the same tea you use to feed your plants is also great at staving off predators and diseases. For best results, dilute 1 part tea in 2 parts water and douse your plants liberally. You’ll need multiple applications to treat infected/sick plants. 

 

  • Beneficial insects. Spiders, predator mites, ladybugs, and lacewings are great for pest control. Check your local garden superstore for mites and friendly insects.  

 

  • Neem oil. Neem oil is a natural pesticide and fungicide that deserves a spot in every garden. 

 

Remember, growing organically is all about recreating a naturally vibrant soil. And while it might seem overwhelming at first, follow the instructions above and you’ll be harvesting your own, home-grown organic weed in no time. 

Le Cannabis nettoie la terre !

///

Il n’y a finalement pas grand-chose que le chanvre ne puisse faire. Il est comestible, curatif, récréatif, permet de faire des textiles et des combustibles, mais saviez-vous que le cannabis peut (littéralement) nettoyer la terre?

La phytoremédiation est un processus qui utilise des plantes vasculaires, des algues ou des champignons comme agent filtrant pour nettoyer les sols contaminés. Et il s’avère que le cannabis pourrait être l’une des meilleures plantes pour la phytoremédiation.

Explications : Le sol (la terre) est  un écosystème complexe et le cœur de la vie végétale, un mécanisme précis que notre rythme de vie met à mal. L’industrie, la fabrication, l’aménagement du territoire, l’élimination des déchets, l’agriculture et les transports sont quelques-unes des  activités humaines mettant en danger la santé des sols dans le monde, au même titre que  l’utilisation quotidienne de shampooings, savons, détergents et dentifrices crée un ruissellement toxique qui nuit à la qualité du sol et à la vie des plantes et des animaux. Face à cette pollution, deux solutions : -Le  processus d’assainissement hors site (comme l’excavation et l’enlèvement du sol d’un site contaminé), très coûteux et qui se limite généralement à de plus petites surfaces.
-Le  processus d’assainissement sur site, plus pertinent et durable, qui repose  sur des produits chimiques ou des synergies naturelles qui peuvent créer un sol stérile.

C’est là que la phytoremédiation entre en jeu; en utilisant des plantes pour absorber les contaminants du sol, il offre un moyen naturel et extrêmement rentable de récupérer la santé de notre sol.

Le cannabis, champion de la phytoremédiation?


La notion de coût est une incontournable constante de toute entreprise. En fait, on peut affirmer que c’est notre obsession des couts, ou plutôt de vouloir les réduire, qui est une des principales causes de pollution.
Heureusement, la phytoremédiation via le chanvre pourrait être l’un des moyens les moins pour onéreux pour commencer à guérir la Terre mère.

C’est dans les années 90 que le professeur Ilya Raskin et son équipe de l’Université Rutgers ont découvert que le chanvre pouvait éliminer les métaux lourds accumulés du sol à Tchernobyl. Ces résultats ont été confirmés à nouveau en 2001 par une équipe de chercheurs allemands.
En 2011, les agriculteurs de la région des Pouilles, en Italie, ont de nouveau mis en pratique cette même théorie. Après des années de pollution provenant d’une aciérie d’Ilva (qui a rejeté des concentrations extrêmement élevées de dioxines dans l’atmosphère), les agriculteurs de la région ont été contraints d’abattre leur bétail, devenu impropre à la consommation humaine. Afin de sauver leurs entreprises, les agriculteurs ont commencé à se tourner vers le chanvre comme culture de rente et un moyen de raviver leurs terres hautement contaminées. Aujourd’hui, les Pouilles abritent toujours d’innombrables fermes et magasins de chanvre.

Mais pourquoi le chanvre? Après tout, la moutarde indienne, les saules, les peupliers, l’herbe indienne, les tournesols et même l’amarante peuvent absorber les contaminants du sol. Alors, qu’est-ce qui distingue le cannabis de ces autres espèces végétales?
D’abord et avant tout, le cannabis est très efficace pour accumuler les contaminants de son sol dans ses branches . Des études montrent, par exemple, que les plants de chanvre peuvent transférer plusieurs métaux lourds (y compris l’arsenic, le cadmium, le cuivre et le zinc) de la racine à la pousse. De plus, les plantes de chanvre industrielles développent également des systèmes racinaires particulièrement longs et complexes qui atteignent beaucoup plus profondément dans le sol que les racines de certaines des plantes mentionnées ci-dessus.

Deuxièmement, le chanvre est très facile et bon marché à cultiver. Il est généralement prêt à être récolté dans les 4 mois et peut résister à des conditions extrêmement mauvaises; même les plantes cultivées à Tchernobyl par le professeur Raskin, par exemple, ne montraient aucun signe de stress.
Enfin, ce qui distingue le chanvre de toutes les autres phytoremédiations mentionnées ci-dessus est le suivant; il produit une biomasse exploitable importante et extrêmement polyvalente.
Souvenons-nous que le chanvre a longtemps été une culture de rente importante. Non seulement il peut être récolté pour ses graines et ses fibres, mais est aussi un excellent biocarburant et peut même être transformé en matériau de construction plus résistant que le béton ! C’est cette polyvalence et ce potentiel de retour sur investissement qui le distinguent, entre autres,  comme l’un des meilleurs remédiateurs de sols de la planète.

Traduction de l’article original du 22 mars « Cannabis can clean the earth »

Could Cannabis Fuel The World ?

////

Besides making for great fiber and a superb smoke, cannabis can be turned into 2 types of fuel; biodiesel and ethanol. So, why aren’t we seeing hemp fuel at the pumps at Shell? Keep reading for an in-depth look at cannabis fuel, it’s advantages, disadvantages and more.

What Is Hemp Fuel And How Does It Hold Up Against Other Fuel Sources?

Hemp can provide 2 types of fuel; biodiesel, made from the oil of pressed hemp seeds, and ethanol, made from fermented hemp stalks. And it turns out that it might just be the most environmentally-friendly fuel source on the planet. 

Crude oil and natural gas, which together fuel almost 70% of the world’s energy consumption, are sourced from reservoirs located thousands of meters underground. Both are fossil fuels formed over millions of years by the decomposition of dead organisms. Their production is expensive and takes a huge toll on the environment. 

Hemp, on the other hand, is a plant that can be grown almost anywhere and produces high yields of biomass for fuel production in a matter of months. And while hemp fuels are about 50% less efficient than petrol, the environmental benefits of growing hemp for fuel far outnumber those of digging for crude oil or natural gas (which are exactly zero). 

Then again, finding an environmental-friendly alternative to crude oil or natural gas isn’t exactly hard. So, let’s ask a different question; how does cannabis hold up when compared to alternative fuel sources like biodiesel and ethanol? 

Biodiesel is made by mixing plant or animal fats and ethanol. According to the US Energy Information Administration, over 50% of biodiesel is made using soybean oil. Ethanol, on the other hand, is typically produced using corn or sugarcane.

As a crop, cannabis boasts a lot of advantages against all 3 of these plants. Plant per acre density for corn, sugarcane and soybean, for example, is usually around 22,000, 25,000 and 100,000, respectively. Hemp, on the other hand, can be grown at a density of up to 1,200,000 per acre, according to Manitoba Agriculture. In fact, hemp is grown at such high densities because it encourages the plants to develop bigger stems as they naturally compete for sunlight. 

Hemp also triumphs over soy, corn, and sugarcane in other ways; it’s easy to grow in a variety of climates, can be harvest-ready in just 4 months, and is particularly resistant to pests and diseases. It can even help extract heavy metals and other contaminants from polluted soils, which is a lot more than what we can say for soybean (which kills biodiversity and contributes to soil erosion). Read more on hemp’s potential as a soil remediator here.

Come harvest time, hemp produces A LOT of biomass. According to Manitoba Agriculture, industrial hemp grown for fiber can produce yields of up to 3 tonnes per acre, while grain plants (grown for seeds) produce about 500kg per acre.

So, Why Can’t I Get Hemp Fuel At Shell or BP?

With so many benefits to growing hemp for fuel (besides its countless other uses), it seems hard to fathom that we’re still not reaping the rewards of this miracle plant. What exactly is keeping the world from going green with hemp fuel? Well, the answer to that is very complicated. 

First and foremost, turning the world over to hemp biodiesel would take huge amounts of farmland. According to Medium, half the US would have to be covered in hemp just to meet the nation’s own demand. Not to mention, hemp biodiesel would retail about 13-times higher than regular diesel. There is still hope, however, for hemp ethanol which, according to some experts, could be produced for under $2 per gallon. 

Unfortunately, hemp is still being held down by the fact that it’s a niche crop that fetches its highest prices when grown for the food, cosmetics, and CBD industries. Oh, and the fact that Standard Oil, Gulf Oil, and DuPont have been linked to cannabis’ prohibition in the 1930s might also have something to do with why we’re not filling our cars with hemp fuel. But that’s a story for another day. 

1 4 5 6 7